Line

Amplifiers

You’re very passionate about your beautiful, powerful car and it’s important for you to give it a strong personality. With their assertive, ultra-technical design, the Performance car audio kits will give your car a unique live touch.

FPX line

Musical and powerful amplifiers

FD line

Ultra compact Amplifiers

ProductsAllFPXFDSAP 4.380

FPX 5.1200

FPX

FPX 5.1200

5-channel amplifier - 4 x 120 Watts

5-channel FPX 5.1200 amplifier has a maximum power of 4 x 120 Watt + 1 x 720 Watt at 2 Ohms!

The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs.

To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to.

Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space.

Classe D amplifierInput selector (2/4/6 channels)Stable under 4 and 2 OhmsAdjustable active crossover for each pair of channelsDimensions: 13.25″ x 6.8″ x 2.25″ (337 x 175 x 57mm)
...

FPX 4.800

FPX

FPX 4.800

POWERFUL AND VERSATILE

The FPX 4.800 is a very compact 4-channel amplifier with a power of 4x120 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.800 is the most versatile model in this range. Thanks to its very high power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair output lines. The high power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line.

4-/3-/2-channel Class D amplifier2-/4-channel input modesStable at 2 OhmsActive crossover for each pair of channelsThe FPX 4.800 measures 921⁄64 x 513⁄64 x 23⁄32″ (23.7 x 13.2 x 5.3 cm).
...

FPX 1.1000

FPX

FPX 1.1000

POWERFUL AND VERSATILE

The FPX 1.1000 is a very compact mono amplifier with a power of 420 Watts RMS at 4 Ohms. Specially designed for powering a subwoofer, this amplifier combines very high power and some great features. Stable at 2 Ohms and 1 Ohm, equipped with a complete range of settings for adjusting low-frequency sensitivity, a remote control and output lines, this amplifier is capable of bluffing performances. Whether it’s for powering an audiophile bass system or a powerful subwoofer, the FPX 1.1000 will meet all your needs for your bass channel.

- Mono Class D amplifier- Complete range of settings (active crossover, subsonic filter, bass boost, phase control)- Stable under 2 Ohms and 1 Ohm- Output lines- The FPX 1.1000 only measures 1111⁄16 x 513⁄64 x 23⁄32″ (29.7 x 13.2 x 5.3 cm).
...
FPX 4.400 SQ

FPX 4.400 SQ

FPX

FPX 4.400 SQ

AUDIOPHILE AND VERSATILE

The FPX 4.400 is a very compact 4-channel amplifier with a power of 4x70 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.400 is the most “sound quality” model in this range. Thanks to its very comfortable power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair output lines. The power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line.

 

4-/3-/2-channel Class ABD amplifier

2-/4-channel input modes

Stable at 2 Ohms

Active crossover for each pair of channels

The FPX 4.400 measures 12 23⁄64 x 6 57⁄64 x 2 1⁄4 " (314x175x57mm)

...

FDS 4.350

FDS

FDS 4.350

VERSATILE AND ULTRA-COMPACT

The FDS 4.350 is the 4-channel model (4 x 58 Watts RMS) and the most versatile of the range. It can operate in 4-, 3- or 2-channel mode. In most cases, it will be used to amplify a car’s front and rear speaker drivers. It can also be used to drive front speaker drivers and a small subwoofer, for a small installation which stays simple and integrated.

4/3/2-channel D Class amplifierRCA low-level inputsCompact
...

FDS 1.350

FDS

FDS 1.350

ULTRA-COMPACT MONO AMPLIFIER

The FDS 1.350 is a mono block amplifier specifically designed for handling a subwoofer channel. It has a power of 210 and 350 Watts RMS under 4 and 2 Ohms respectively. In order to configure the system’s bass according to the car’s installation; it is equipped with an active crossover, bass correction and phase adjustment.

Mono D Class amplifier with dual outputRCA low-level inputsCompact
...
AP_4.380_34D

AP 4.380

AP 4.380
AP 4.380

Make every drive a memorable one.

4-CHANNEL AMPLIFIER

The AP 4.380 amplifier is an ideal choice for powering a car audio kit while providing a complete system. Its RCA input makes it easy to integrate with the car radio, and its Class A/B power amplifier maximises in-car sound dynamics.

...

Multi-award winning
See all awards

The product line documentation



Continue the Focal experience