Archive: BombA 27 V1
Description
Bass-reflex enclosure with 27 V1 Polyglass cone subwoofer, flared vent, 300W built-in amplifier, multiple controls available. Installation kit provided. The Polyglass solution that focuses on amplification and enclosure to produce a punchy bass from a small car audio box.
Technical specifications
| Nominal impedance | 4 Ohms | |
| Product type | Amplified enclosure | |
| Controls | Sound level, phase, Bass-Boost, cut-off frequency, high and low level input. | |
| Dimensions | (HxLxD) 310 x 466 x 371 mm | |
| Load | Vented | |
| Max. amplification | 300W | |
| Frequency response (+/-3dB) | 36Hz - 500Hz | |
| Subwoofer | 27cm (11") Polyglass cone | |
| Magnet | 120mm (4.7") | |
| Voice coil | 50mm (2") |
Documentations
Commercial information
About the product
About the line
Product information
About the product
Press review
About the product
© Boost Tuning (09/09/2011)- Super GTI Mag (01/07/2007)
- Boost Tunning (01/06/2007)
- FA062007BOMBA27V1F8 (01/06/2007)
- © Maxi Tunning (12/02/2007)
About the line
- © Super GTI Mag (31/08/2011)
- © Car Audio Video.com (01/07/2011)
- © Car Audio Video.com (02/04/2010)
- © Boost Tuning (30/09/2009)
- © Maxi Tuning (08/09/2009)
- © Hi-Fi Video-012008 (01/01/2008)
- INCAR2007 (01/10/2007)
- © GTI Mag (04/05/2006)
- © Son Vidéo Magazine (04/05/2006)
- © Boost Tuning (04/05/2006)
- © Maxi Tuning (04/05/2006)
