Installing the iTransmitter on Bird 2.1 in video

Bird system

Remove the magnetic wire cover

Put the cable in the "Tulipe"
stand...

... or in the "Cocotte" stand

Connection to the terminals :
Positive (+) wire on red terminal
Negative (-) wire on black terminal

Ajust the cable length

Replace the magnetic wire cover

Power Bird linking:
Positive (+) wire on red terminal
Negative (-) wire on black terminal

Second  satellite linking to
Power Bird

Loosen the 4 screws to place the
wire cover grille then screw them
back again

Switch on Power Bird

Press "WIRELESS SYNC" button
(until rapid flashing)

Connect the iTransmitter on your
iPhone

Turn on the iPhone

if a window appears, press NO
(the iApp download can be done
later)

IMMEDIATELY press the SYNC
button at the iTransmitter before
it flashes. If you didn't, then start
again

Keep pressing the SYNC button
for about 7 sec
(until rapid flashing)

When flashing becomes slower
synchronization is definitely made

Select the WIRELESS input on
Power Bird