Installing the iTransmitter on Bird 2.1 in video

Bird system installation & iTransmitter synchronization

  More infos about iTransmitter and Bird

 

Bird system installation

1.

Bird system

2.

Remove the magnetic wire cover

3a.

Put the cable in the "Tulipe"
stand...

 
3b.

... or in the "Cocotte" stand

4.

Connection to the terminals :
Positive (+) wire on red terminal
Negative (-) wire on black terminal

5.

Ajust the cable length

 
6.

Replace the magnetic wire cover

7.

Power Bird linking:
Positive (+) wire on red terminal
Negative (-) wire on black terminal

8.

Second  satellite linking to
Power Bird

 
9.

Loosen the 4 screws to place the
wire cover grille then screw them
back again

 

Synchronization of iTransmitter with Power Bird

1.

Switch on Power Bird

2.

Press "WIRELESS SYNC" button
(until rapid flashing)

3.

Connect the iTransmitter on your
iPhone

 
4.

Turn on the iPhone

5.

if a window appears, press NO
(the iApp download can be done
later)

6.

IMMEDIATELY press the SYNC
button at the iTransmitter before
it flashes. If you didn't, then start
again

 
7.

Keep pressing the SYNC button
for about 7 sec
(until rapid flashing)

8.

When flashing becomes slower
synchronization is definitely made

9.

Select the WIRELESS input on
Power Bird