Arche

Arche

COMPATIBILITY UPDATE (ANDROID / LINUX)


JULY 2020

Here's how to update the firmware on Android and Linux:


STEP 1: Download the USB device driver

If you have not already done so, first check that the Arche driver is installed on the computer that will perform the update.

USB device driver

STEP 2: Download the application

Below is the link to download the application used to update the firmware of the Xmos chipset (in Arche).

Application

STEP 3: Download the update file

Below is the link to download the .bin file used to update the application.

Update file

STEP 4: Install the update


  • Connect the USB-A / USB-B cable between the computer and ARCHE (USB-B), unzip the downloaded application file, then load the bin file using the Browse button.
  • Run the update. Once the update is complete, restart Arche.


This update only works on Windows.



Please note: some Android devices may also require :


- a USB OTG cable

- download the Audio Player Pro (UAPP) application for certain streaming applications. Click here to access the application.

RESET FACTORY SETTINGS


FACTORY FIRMWARE

Here is the procedure for resetting the Factory Firmware:


STEP 1: Download the application

Below is the link to download the application used to update the firmware of the Xmos chipset (in Arche).

Application

STEP 2: Download the Factory Firmware file

Below is the link to download the .bin file used to reset Arche to its original firmware.

Factory firmware

STEP 3: Installation


  • Connect the USB-A / USB-B cable between the computer and ARCHE (USB-B), unzip the downloaded application file, then load the bin file using the Browse button.
  • Start the reset. As soon as it is complete, restart Arche.

Similar products

JOIN THE COMMUNITY

Subscribe to our newsletter and receive a preview of the latest audio innovations from Focal and Naim.